Three way ball valve has T and L types. The T type can make the three orthogonal pipes connect with each other and cut off the third channels. Two pipeline L three ball type valve can only be connected mutually orthogonal, communicating with each other while maintaining the third pipeline, only as a distribution function.
1 fluid resistance is small, and its resistance coefficient is equal to the length of the pipe section.
2 simple structure, small size, light weight.
3 close and reliable, good sealing, in the vacuum system has also been widely used.
4 easy operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control.
5 easy maintenance, ball valve structure is simple, seals are generally active, disassembly and replacement are more convenient.
6 in the fully open or fully closed, the ball and valve seat sealing surface and the dielectric isolation, the medium through, will not cause erosion of the valve sealing surface.
7 a wide range of applications, from small to a few millimeters in diameter, up to a few meters from the high vacuum high pressure can be applied.
Sanitary ball valve can be divided into straight through, three and right angle according to its channel position. The two ball valve can be used for the distribution of media and change the flow of media.
1 to leave the valve handle rotation position.
2 cannot be used as throttling.
3 ball valve transmission mechanism should be installed upright.
Three way ball valve works by rotating the valve to make the valve flow or occlusion. Valve is featured by switch light, small size, can be made large caliber, reliable sealing, simple structure, easy maintenance, sealing surface and spherical often in the closed state, the media can not easily be eroded, widely used in various industries.
Three way ball valve is mainly used for cutting in the pipeline, distribution and change the direction of the flow of media.
Three way ball valve is a new type of ball valve, it has its own unique advantages of the structure, such as the switch without friction, seal is not easy to wear, opening and closing torque is small. This reduces the size of the actuator. Equipped with multi turn electric actuator, can adjust the medium and cut off tightly. It is widely used in petroleum, chemical industry, urban water supply and drainage, etc..